RES-50002: Asynchronous Reset is Insufficiently Synchronized

Description

Violations of this rule identify asynchronous reset synchronizer chains that are one register long. Such chains are too short to prevent metastability.

Figure 1. Single-Stage Reset Synchronizer Chain Example.. The following figure shows an example of a asynchronous reset synchronizer chain with only one stage, which triggers the RES-50002 Design Assistant violation. To prevent a violation, the register must be followed by at least one other register also latched by clk and reset by the same asynchronous reset signal.

Recommendation

Synchronize the release of asynchronous reset signals with a reset synchronizer chain. Use Asynchronous Reset Synchronizer Parameterizable Macro (ipm_cdc_async_rst) to generate a reset synchronizer chain.

Refer to the documentation of Inserting HDL Code from a Provided Template in the Quartus Prime Pro Edition User Guide: Design Recommendations for instructions on adding (or instantiating) this macro.

To resolve the violation without using the Asynchronous Reset Synchronizer Parameterizable Macro, ensure that all asynchronous reset synchronizer chains contain at least two registers. Refer to Asynchronous Reset Design Assistant Analysis for an example using Design Assistant to identify and correct problematic asynchronous reset conditions, such as RES-50001 – Asynchronous Resets Not Synchronized.

Figure 2. Multiple-Stage Reset Synchronizer Chain Example.. The following figure shows an example of a asynchronous reset synchronizer chain with two stages.

Severity

High

Tags

Tag Description
synchronizer Design rule checks related to synchronizer chains.

Device Family

  • Cyclone® 10 GX
  • Arria® 10
  • Stratix® 10
  • Agilex®
  • Agilex®
  • Agilex®
  • Agilex®
  • Agilex®