CDC-50008: CDC Bus Constructed with Multi-bit Synchronizer Chains

Description

Violations of this rule identify multi-bit synchronizer chains that form a CDC bus. This CDC topology is only valid for buses that transfer gray-coded data.

Figure 1. Synchronized CDC Bus Transfer.. The following figure shows a synchronized CDC bus transfer, which must be gray-coded to work correctly:

Recommendation

If the bus does not transfer gray-coded data, replace the existing CDC handshake circuit with the Bus Synchronizer Parameterizable Macro (ipm_cdc_bus_sync).

Refer to the documentation of Inserting HDL Code from a Provided Template in the Quartus Prime Pro Edition User Guide: Design Recommendations for instructions on adding (or instantiating) this macro.

To resolve the violation without replacing the circuit with the Bus Synchronizer Parameterizable Macro, change its implementation to incorporate a control signal, since synchronizer chains are insufficient to ensure that all bits of the bus latch on the same clock cycle.

If you have verified that this bus transfers gray-coded data, you can waive this violation or apply the QSF assignment VERIFIED_GRAY_CODED_BUS_DESTINATIONS ON to all of the multi-bit synchronizer chain's head registers. For example, if the head registers for the multi-bit synchronizer bus are dst_reg[3:0], you can apply the QSF assignment to dst_reg[*] in the Assignment Editor, or add the following line to your project's .qsf file: set_instance_assignment -name VERIFIED_GRAY_CODED_BUS_DESTINATIONS ON -to dst_reg[*], or declare the assignment using altera_attribute in the HDL file. In Verilog, you can specify: (* altera_attribute = "-name VERIFIED_GRAY_CODED_BUS_DESTINATIONS ON" *) reg [3:0] dst_reg, and in VHDL, you can specify: signal dst_reg : std_logic_vector (3 downto 0); attribute altera_attribute : string; attribute altera_attribute of dst_reg : signal is "-name VERIFIED_GRAY_CODED_BUS_DESTINATIONS ON"; to declare the head registers of the synchronizer bus.

Severity

Low

Tags

Tag Description
synchronizer Design rule checks related to synchronizer chains.
cdc-bus Design rule checks related to topologies that use a bus to transfer multiple bits of data between clock domains at once.

Device Family

  • Cyclone® 10 GX
  • Arria® 10
  • Stratix® 10
  • Agilex®
  • Agilex®
  • Agilex®
  • Agilex®
  • Agilex®