INCLOCK_PERIOD
|
Integer
|
No
|
Specifies the period of the
inclock port in picoseconds (ps) time unit Definition This parameter is not
required if a Clock
Settingstiming assignment is
specified for the inclock port. This port is required
for simulation with other EDA simulators.
|
INCLOCK_SETTINGS
|
String
|
No
|
Specifies the Clock Settings assignment
to be used with the inclock port. If the
INCLOCK_SETTINGS parameter is specified, the
INCLOCK_PERIOD parameter is not required and is
ignored. If omitted, the default is "UNUSED".
|
VALID_LOCK_CYCLES
|
Integer
|
No
|
This parameter is available only for
obsoleted device families.
|
INVALID_LOCK_CYCLES
|
Integer
|
No
|
This parameter is available only for obsoleted
device families.
|
VALID_LOCK_MULTIPLIER
|
Integer
|
No
|
This parameter is available only for obsoleted
device families.
|
INVALID_LOCK_MULTIPLIER
|
Integer
|
No
|
This parameter is available only for obsoleted
device families.
|
OPERATION_MODE
|
String
|
No
|
This parameter is available only for obsoleted
device families.
|
CLOCK0_BOOST
|
Integer
|
No
|
Specifies the integer multiplication factor,
which must be greater than 0, for the
clock0 port with respect to the input clock frequency.
This parameter can be specified only if the clock0
port is used; however, it is not required if a Clock
Settings assignment is specified for the clock0
port. If omitted, the default is 1.
|
CLOCK0_DIVIDE
|
Integer
|
No
|
Specifies the integer division factor, which
must be greater than 0, for the clock0
port with respect to the input clock frequency. This parameter can
be specified only if the clock0 port is used; however,
it is not required if a Clock Settings assignment is
specified for the clock0 port. If omitted, the default
is 1.
|
CLOCK0_SETTINGS
|
String
|
No
|
Specifies the Clock Settings assignment
to be used with the clock0 port. If this parameter is
specified, the CLOCK0_BOOST,
CLOCK0_DIVIDE, and OUTCLOCK_PHASE_SHIFT
parameters are not required and are ignored. If more than one of
the CLOCK<value>_SETTINGS
parameters are specified, they must have the same phase shift. If
omitted, the default is "UNUSED".
|
CLOCK1_BOOST
|
Integer
|
No
|
Specifies the integer multiplication factor,
which must be greater than 0, for the
clock1 port with respect to the input clock frequency.
This parameter can be specified only if the clock1
port is used; however, it is not required if a Clock
Settings assignment is specified for the clock1
port. If omitted, the default is 1.
|
CLOCK1_DIVIDE
|
Integer
|
No
|
Specifies the integer division factor, which
must be greater than 0, for the clock1
port with respect to the input clock frequency. The parameter can
be specified only if the clock1 port is used; however,
it is not required if a Clock Settings assignment is
specified for the clock1 port. If omitted, the default
is 1.
|
CLOCK1_SETTINGS
|
String
|
No
|
Specifies the Clock Settings assignment
to be used with the clock1 port. If this parameter is
specified, the CLOCK1_BOOST,
CLOCK1_DIVIDE, and OUTCLOCK_PHASE_SHIFT
parameters are not required and are ignored. If more than one of
the CLOCK<value>_SETTINGS
parameters are specified, they both must have the same phase shift.
If omitted, the default is "UNUSED".
|
OUTCLOCK_PHASE_SHIFT
|
Integer
|
No
|
This parameter is available only for obsoleted
device families.
|