The altufm_parallel
megafunction implements user non-volatile memory for MAXII
devices using the parallel interface protocol. The altufm_parallel
megafunction is available for MAXII and MAX V devices
only.
Altera recommends instantiating this function with the IP
Catalog.
Note: - For this megafunction, the IP
Catalog generates output files with multiple entities or
modules. The top-level entity or module is located at the bottom of
the file.
- When performing a VHDL simulation with a Standard Delay Format Output File (.sdo) Definition, you must assert the devpor
signal at time 0 to reset the registers in the logic cells before
starting a VHDL simulation.
- You can use the Assignment Editor to add, change, or delete assignments and assignment
values for megafunctions.
- When you create the megafunction, you can use the IP Catalog to generate a netlist
for third-party synthesis tools.
Note: More information is available on the altufm_parallel megafunction on the Altera
website.